Rod Mill/Rod Mill Manufacturers/Rod Mill For Sale--Shanghai Sievo Beneficiation Equipments Manufacturer

Introduction

This production line enjoys the advantages of high efficiency, low energy cost, high production capacity and economy and rationality.

The procedure of the production line goes like this: the ore is first sent to jaw crusher for primary crushing. Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and gouped mixture is sent to magnetic separator, due to the different susceptibility, magnetic substance can be separated from the mixture under magnetic.

Crusher Equipment

Beneficiation Equipment

Construction Material

PRODUCT

Rod Mill

Rod Mill Introduction：
At present, rod mill is the most effective crushing machine and its performance has achieved the international standard. It is widely applied in the gravel industry. And it is mainly used for processing or crushing the feldspar, quartz, minerals and other raw materials, and it is also suitable for finely or secondarily crushing the various tough or brittle materials, such as grinding material, refractory material, cement, steel shot, pulverized slag, copper ore, iron ore, gold ore, concrete aggregate, bituminized aggregate. Now it is a most advanced high-efficient low consumption sand-maker in the world.

Working principles：
Depending on the reduction box and the reduction of the peripheral big gear wheel, the motor rotary drives the cylinder rotating or the motor drives the cylinder rotating directly by the peripheral big gear wheel. And inside the cylinder, there’s an appropriately grinding medium-steel bar .The steel bar will drop after reaching a certain height with friction and the centrifugal force. And the material will be hit and grinded to achieve the purpose of making sand.

Features and Benefits：
1. Higher capability and more even discharging size. Adopted advanced technology of sand maker-rod mill by controlling the input or output materials; related to the user’s actual grinding materials, choosing an appropriate grinding medium, replaced the traditional surface contact to the linear contact . Therefore, its discharging size is more even, the capability is higher, suitable for various hardness of ore.( Moths hardness 5.5-12).
2. Adjustable fineness of limestone. Through simple adjustment, will change the discharging size ,and inside , has finesse control device and screening device, ensuring not over grinding and avoiding the unqualified product interfusing into end products.

NOTE:
According to the actual situation, the user can choose the dry or wet method of the sand maker-rod mill. As to the materials which contain the ferrum, like quartz sand, dolomite and monazite, the user can add a magnetic separator to finish the processing of de-ironing.

Main Technical Parameters:

Model	Barrel size(mm)	Effective volume （m³）	Balls weight （t）	Rotating speed （r/min）	Power （kw）	Discharge size（mm）	Capacity （t/h）	Weight（t）
MB0924	Φ900×2400		3.1	29	22	2.5-0.2	10-2.9	6.6
MB1224	φ1200×2400		6.5	27	37	2.5-0.2	13-5	13.5
MB1530	φ1500×3000	5.0	8	23	75	2.5-0.2	12-5.5	16.71
MB1830	φ1800×3000	6.5	17	22.8	130	2.5-0.2	20-9.5	29.8
MB2136	φ2100×3600	11.0	28	20.9	210	2.5-0.2	35-14.8	49.4
MB2436	φ2400×3600	14.6	37	19	280	2.5-0.2	55-26	61.0
MB2740	φ2700×4000	20.5	47	17.5	400	5-0.8	165-50	84.3
MB3040	φ3000×4000	25.9	50	16.2	500	5-0.8	206-62	130
MB3245	φ3200×4500	33	56	15.5	630	5-0.8	228-70	138
MB3654	φ3600×5400	50	94	14.5	1000	5-0.8	340-103	192

Please input your inquiry in below form, we will get back to you as soon as possible!

Product name：	*
Product model：	*
Orders units：
The address：
Number of units：	*	E-mail：	*
Contact：		Post：
Telephone：	*	Fax：
Mobile：		Postal code：
Special technical requirements：