Cone Crusher

Cone Crusher Introduction：
cone crusher is a high-efficiency low consumption equipment which has the world advanced technical level, Now it is the new generation of the cone crusher substituted the spring cone crusher. Compared with the traditional crusher, it features more reliable structure, higher efficiency, easier adjustment setting, lower cost and higher productivity. And with excellent optimization, the S series has more reasonable structure and advanced technology. Besides, it also has outstanding performance in manufacturing, installation, using and maintance. It is widely used in metal and non-mental mines, cement factory, building construction, gravel metallurgy and other industries, especially for crushing various of mid-hard and above mid-hard materials, such as: iron ore, nonferrous metal ores, granite, limestone quartzite, sandstone, pebbles, etc.

Operation principles：
S high-efficiency cone crusher mainly consists of frame, shaft coupling, eccentric bearing, bowl shaft, crushing cone, adjustment setting, spring, triangle belt hydraulic setting, etc. And the supplementary part is made up of electric system, oil lubricating system and hydraulic clearing cavity system.
During operation, the motor drives the eccentric shaft rotate through the belt pulley or coupling axle, and the eccentric shaft force the shaft coupling and cone rotate a revolution by a fixed point., thus enable the crushing cone swings approach and leave the surface of the crushing wall from time to time. Finally the ore will be crushed by impacting, grinding and bending in the cavity.

Features and Benefit:
1、High-performance
Adopt optimum design and combine the reasonable velocity and stroke, make the cone crusher have largest capacity at the same active cone diameter, compared with the same types, it has higher performance and capacity.
2、Even product size
Adopt laminated crushing principle, increase the ratio of the cube shape obviously, but reduce the stones of the needle shape among the end products , and the size is more even.
3、Good stability
When the steel or other materials enter into the body, which is no-demanded to be crushed, will be discharged by the safety device, and then it will be automatic recovery.
4、Easy clearing cavity
If the crusher shut down under heavy load conditions, the hydraulic clearing cavity system will clear cavity immediately, reduce the downtime greatly.
5、High reliability
Adopt auto-control system with major diameter main shaft, heavy frame, and separated oil lubricating system, ensure the device is sturdier durable, and reliability.
6、Easy maintain and operation.
All parts can be easily disassemble or assemble from the upper or the side, and the fixed cone and active cone can also be dismantled easily. The bronze sliding shaft can keep excellent carrying capacity in the condition of high impact vibrating crush, and compared with the moving shaft, it is more economy and easier to maintain.
7、Low cost
The large productivity, high reliability and easy maintain reduce the cost greatly.
8、Various Applications
S series can exploit its best performance to suit the various crushing methods, such as from special tough crushing to fine crushing; from fixed crushing to moving crushing.
9、Safety protection
The oil lubricating system ensures the lubricated dual-protection for the shaft, and realizes the automatic safety protection of the machine.