Aac Plant/Aerated Concrete Equipment/Autoclave Aerated Concrete Plant/Autoclave Aerated Concrete Blocks Equipment--Shanghai Sievo Beneficiation Equipments Manufacturer

Introduction

This production line enjoys the advantages of high efficiency, low energy cost, high production capacity and economy and rationality.

The procedure of the production line goes like this: the ore is first sent to jaw crusher for primary crushing. Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and gouped mixture is sent to magnetic separator, due to the different susceptibility, magnetic substance can be separated from the mixture under magnetic.

Crusher Equipment

Beneficiation Equipment

Construction Material

PRODUCT

Autoclaved Aerated Concrete Equipment

(1).Development and characteristics:
    Aerated concrete as an important part in the innovation of wall material and construction energy-saving is a kind of ideal material after application of years and can instead of clay brick. It has competence among wall materials. The government has clearly pointed that “Develop the aerated concrete blocks and the aerated concrete production line with annual capacity between 20,000 to 300,000 cubic meter; Autoclave maintenance and machinery cutting.” Because of the wall innovation and the advantages of the aerated concrete products, aerated concrete will be the most developed new construction materials in the recent 10 years with its light weight.
    Aerated concrete has the advantages of light weight, good heat preservation and sound absorbing and is of certain intensity and can be processed, etc.
(2).Production Process of Aerate Concrete:
    The equipment of aerate concrete can adopt favorable production process according to the type and feature. Under certain circumstance, grind the fly ash or silica sand or slag to be slurry by adding water. Then add powder lime, proper cement, plaster and vesicant and foam stabilizer. After stir, pour the slurry to the mold. When the slurry becomes solid, it can be cut into various sizes to be block or panel. Then put the blocks or panels into the autoclave by the hardening car. After the hardening of high temperature steam, concrete with light weight is made out.
(3). Equipments of Aerated Concrete Production
    The model and quantity of the equipments of aerated concrete production is decided by the process design. Because of the process difference of the aerated concrete production, there is different equipment technology correspondingly to the production process. All those features are reflected on the cutting machine. It is related to the adjustment of the pouring style, mold, design of hardening car, cake transportation, remold, cutting, piling and the autoclave-entering style.

Please input your inquiry in below form, we will get back to you as soon as possible!

Product name：	*
Product model：	*
Orders units：
The address：
Number of units：	*	E-mail：	*
Contact：		Post：
Telephone：	*	Fax：
Mobile：		Postal code：
Special technical requirements：