Introduction
This production line enjoys the advantages of high efficiency, low energy cost, high production capacity and economy and rationality.
The procedure of the production line goes like this: the ore is first sent to jaw crusher for primary crushing. Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and gouped mixture is sent to magnetic separator, due to the different susceptibility, magnetic substance can be separated from the mixture under magnetic.
The procedure of the production line goes like this: the ore is first sent to jaw crusher for primary crushing. Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and gouped mixture is sent to magnetic separator, due to the different susceptibility, magnetic substance can be separated from the mixture under magnetic.
Crusher Equipment
- Sand Making Machine
- Stone Making Machine
- Stone crusher
- Jaw Crusher
- Impact Crusher
- Cone Crusher
- Single-stage Hammer Crusher
- Ring Hammer Crusher
- Hammer Crusher
- Vertical Shaft Impact Crusher
- Roller Crusher
- Fine Impact Crusher
- Rod Mill
- Mobile Crusher Station
- Vibrating Feeder
- Vibrating Screen
- Belt Conveyor
- Sand Washer
- Stone Washer
Beneficiation Equipment
Construction Material
- Cement Production Line
- Cement Rotary Kiln
- Cyclone Preheater
- Cement Mill
- Raw Mill
- Coal Mill
- Vertical Mill
- Powder Concentrator
- Pulse Bag Dust Collector
- Rotary Kiln
- Lime Rotary Kiln
- Vertical Preheater
- Vertical Cooler
- Active lime assembly line
- Autoclaved Aerated Concrete Equipment
- Steel Wire Belt Elevator
- Chain Bucket Elevator
- Screw Weigher
- Belt Scale
PRODUCT
Belt Conveyor
Belt conveyer is a kind of machine that to transfer the material continuously. The belt works under the effect of frictional force. It is not only the components to transfer the material, but also the components to transfer the force.
The belt conveyer is advanced and simple in structure, easy to maintain. Its transfer capacity is high, transfer distance is long. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. In many situation, it Is a very important component of nonstandard machinery.
The conveyers which are produced by us consist of standard parts, which are advanced and simple in structure, easy to maintain. They are widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material. According to different transferring equipment, the transfer system can be one independently or multi-conveyers or combined with other transfer equipments. The belt conveyer can be installed horizontally or aslope to meet the needs of different transfer lines.
The belt conveyers produced by us can be operated in the circumstance temperature range from -20℃ to +40℃. The temperature of transferred material by this belt conveyer should be lower than 50℃.
Main Technical Parameters of Belt Conveyor:
| Belt width (mm) | Length(m) | Power （kw） | Length(m) | Power（kw） | Length(m) | Power（kw） | Belt speed(m/s) | Capacity (t/h) |
| 500 | ≤12 | 3 | 12-20 | 4-5.5 | 20-30 | 5.5-7.5 | 1.3-1.6 | 78-91 |
| 650 | ≤12 | 4 | 12-20 | 5.5 | 20-30 | 7.5-11 | 1.3-1.6 | 31-323 |
| 800 | ≤6 | 4 | 6-15 | 5.5 | 15-30 | 7.5-15 | 1.3-1.6 | 278-546 |
| 1000 | ≤10 | 5.5 | 10-20 | 7.5-11 | 20-40 | 11-22 | 1.3-2.0 | 435-853 |
| 1200 | ≤10 | 7.5 | 10-20 | 11 | 20-40 | 15-30 | 1.3-2.0 | 655-1284 |
| 1400 | ≤10 | 7.5 | 10-20 | 11 | 20-40 | 15-30 | 1.3-2.0 | 655-1284 |
| 1600 | ≤10 | 7.5 | 10-20 | 11 | 20-40 | 15-30 | 1.3-2.0 | 655-1284 |
Please input your inquiry in below form, we will get back to you as soon as possible!
Shanghai Sievo Ball Mill Manufacturer All rights reserved @ be by 2012 E-mail: info@sievo.cn
Address: No.299 Shenzhou Road,Fengxian District,Shanghai,China
Address: No.299 Shenzhou Road,Fengxian District,Shanghai,China