Introduction
This production line enjoys the advantages of high efficiency, low energy cost, high production capacity and economy and rationality.

The procedure of the production line goes like this: the ore is first sent to jaw crusher for primary crushing. Then the ore with a proper size for secondary crushing will be sent into the ball mill for fine crushing and grinding. The ore powder discharged from the ball mill will be sent to the next procedure: classifying. Because of the different sedimentation rate due to the varied specific gravity, spiral classifier can clean and group the ore mixture. The cleaned and gouped mixture is sent to magnetic separator, due to the different susceptibility, magnetic substance can be separated from the mixture under magnetic.
Crusher Equipment
Beneficiation Equipment
Construction Material
PRODUCT

Single stage Hammer Crusher

Hammer Crusher

    This series of hammer crusher is suitable for crushing compression strength not more than 200Mpa of limestone, gypsum, coal, marl, sandstone and shale, etc. High reduction ratio (the feed size is up to 1000mm, the material particle size is less than 25mm). It is widely used in cement industry with simplified process, uniform product particle size, simple structure, reliable operation, easy maintenance and economical operation costs and so on.
    Our hammer crusher features as below:
    High reduction ratio:
    Maximum feeding size is 1.3-1.5m; 3-150mm of discharging size.
    High fineness of discharging size:
    Aggregate favorable shape; the powder material is no more than 20%.
    Simple process:
    Two or three stages crushing are reduced to single stage.
    Economical:
    Small capacity of matched motor thus greatly reduces the production cost.

Main Technical Parameters of Hammer Crusher:
Model Max feed size(mm) Rotor diameter(mm) Rotor length(mm) Sieve residue of discharging size≤15% Capacity(t/h) Motor power(kw) Weight(t)
PCF-1412 600×600×900 1420 1200 ≤25 80-120 220 23.5
PCF-1616 800×800×1000 1650 1630 ≤25 180-220 315-355 43.3
PCF-1616 Ⅱ              
PCF-1618 ≤1m3 1650 1830 ≤25 240-280 400 49.5
PCF-1818 900×900×1000 1850 1830 ≤25 300-350 560 70
PCF-2018 ≤1m3 2020 1802 ≤25 350-500 630-710 89
PCF-2018 Ⅱ 1000×1000×1000     ≤25-75 350-450 630-700  
PCF-2022 1000×1000×1500 2010 2230 ≤30占90% 600-800 800 111
PCF-2022Ⅱ 1000×1000×1500 2010 2230 ≤70占90% 600-800 800 130
PCF-2022Ⅲ 1000×1000×1500     ≤80占90% 700-800 800  
2PCF-1818 1000×1200×1500 1850 1830 ≤75 1000 560 119
2PCF-2030 1000×1000×1500 2020 2230 ≤25 700-900 800×2 142


Please input your inquiry in below form, we will get back to you as soon as possible!
  Product name：    *
  Product model：    *
  Orders units：   
  The address：   
  Number of units：    *   E-mail：    *
  Contact：      Post：   
  Telephone：    *   Fax：   
  Mobile：      Postal code：   
  Special technical requirements：
  
             
Shanghai Sievo Ball Mill Manufacturer All rights reserved @ be by 2012 E-mail: info@sievo.cn
Address: No.299 Shenzhou Road,Fengxian District,Shanghai,China